Manufacturer for High Vacuum Stainless Steel Cf Tees - ZJ Series Roots Vacuum Pump – Super Q

Short Description:

Send email to us

Product Detail

Product Tags

Feedback (2)

, , ,

Manufacturer for High Vacuum Stainless Steel Cf Tees - ZJ Series Roots Vacuum Pump – Super Q Detail:

ZJ series Roots vacuum pump

This series of Roots-type vacuum pumps cannot be used alone. It needs to be used in series with the pre-stage vacuum pump to increase the pumping rate of the pre-stage vacuum pump when the pressure is lower than 1.3×103~1.3×10-1 Pa. The structure is composed of two 8-shaped rotor sections and a rotor casing, and the two rotors do not contact each other and rotate in opposite directions in synchronization with each other.

ZJ series Roots vacuum pumps are mainly applied to:

PVD coating, magnetron sputtering, ion plating, optical coating etc;

Single crystal furnace, polycrystalline furnace, sintering furnace, annealing furnace, quenching furnace etc;

Vacuum drying, freeze drying, leak detection system, gas recovery system, liquid crystal injection etc;

Vacuum industry such as refrigerators, household air conditioners, central air conditioners, automatic evacuation lines for backlights, and exhaust equipment.

Model			ZJ-30	ZJ-70	ZJ-150	ZJ-300
Pumping ratem³/h(L/min)		50HZ	100(1667)	280(4670)	500(8330)	1000(16667)
		60HZ	120(2000)	330(5500)	600(1000)	1200(20000)
Max. inletpressure(when continuous work)		50HZ	1.2X10³		1.3X10³
		60HZ	9.3X10²		1.1X10³
Maximum allowable pressuredifference(Pa)		50HZ	4X10³		7.3X10³
		60HZ	3.3X10³		6X10³
Ultimate pressure(Pa)			1X10^-1
Standard rough pump m³/h			16	40、60	90、150	150、240
Motor(2poles)KW			0.4	0.75	2.2	3.7
Lubricating oil specification			Vacuum Pump Oil
Oil Capacity L			0.4	0.8	1.6	2.0
Cooling Water	Flow L/min		/	2^*1	2	3
	Pressure difference MPa		/	0.1
	Water Temp ⁰C		/	5-30^*2
Weight Kg			30	51	79.5	115
Inlet Dia. mm			50	80	80	100
OutletDia.mm			50	80	80	80